website Skip to content
USE CODE "COZYEAZY" FOR 10% DISCOUNT
|
English
  • Language EnglishEnglish
  • Language FrançaisFrançais
  • Language DeutschDeutsch
USD
  • USD
  • EUR
  • GBP
  • CAD
  • AUD
  • NZD
  • CHF
  • JPY
  • SEK
  • NOK
  • DKK
  • PLN
  • MXN
  • BRL
  • SGD
  • HKD
  • AED
  • SAR
  • ILS
  • ZAR
  • KRW
  • INR
DISCOVER LIGHTING

Wood and Iron Retro Table Lamp: Leather Accents for Bedside Reading

  • by COZYEAZY

This is a compact accent table lamp built from wood, iron, and leather, designed to sit on a nightstand, desk, or side table and cast a warm, character-rich light for reading. It suits people who want a tactile, retro-looking lamp rather than a plain metal or ceramic base, and who have a surface roughly 10 inches deep to work with. It solves two common bedside problems at once: it gives you a focused pool of warm light where you actually read, and it adds a finished, layered look to a corner that usually ends up with a bare bulb or an oversized shade.

The lamp uses a halogen bulb on an E26 or E27 base (bulb not included), carries an IP20 rating for dry indoor spaces, and is operated by an inline on/off switch on a 59-inch power cord. You can see the full configuration options on the Wood and Iron Retro Table Lamp product page.

What This Wood and Iron Retro Table Lamp Is, and Who It Suits

In plain terms: a small, materials-forward table lamp. The body is wood with a visible natural grain, framed in iron for structural stability, with leather detailing that softens the silhouette. It is a plug-in fixture — no wiring work, no hardwiring, no electrician.

It tends to fit well in these situations:

  • Bedside reading. The 12.6-inch height keeps the shade near seated eye level when the lamp sits on a standard nightstand, so light lands on the page rather than in your eyes.
  • Small rooms and apartments. At L 9.8" x W 7.1" x H 12.6" (25 x 18 x 32 cm), the footprint is narrow enough for a slim console or a shared bedside table.
  • Rented or temporary spaces. The inline switch on the cord means you never need to reach a wall switch behind furniture.
  • Warm, layered interiors. Wood and leather age well next to linen, wool, and other matte natural textures.

It is not the right choice for a bathroom, a covered porch, or any damp location — the IP20 rating is for dry indoor use only, and the lamp is not waterproof.

Design and Materials: Wood, Iron, and Leather

Each material does a specific job here. The wood body carries the natural grain and the warm tone, and it is what gives the lamp its retro read rather than a machined, industrial one. The iron frame supplies the structural stability and a quiet metallic contrast at the edges. The leather detailing adds a soft, tailored note that keeps the piece from looking like a workshop offcut.

Together they produce a lamp that reads as furniture rather than as an accessory — which is exactly what a bedside corner usually needs.

Body and shade finishes

The body is offered in gold, brown, and walnut. The shade comes in dark green, violet, black, beige, and brown. That gives you two distinct directions:

  • Moody and library-like: a walnut base paired with a dark green shade, next to a stack of books and a dark wood nightstand.
  • Calm and airy: a beige or brown pairing that sits quietly against white walls and light oak floors.

The gold body works as the accent option — useful when the rest of the room is neutral and you want one warm metallic point of interest.

Wood and iron retro table lamp with leather detailing shown in a bedroom setting

Space and Placement: Making a Small Surface Work

Because the lamp is compact, placement is more forgiving than with a full-size table lamp. Three arrangements that work in practice:

1. The nightstand

Set it toward the back corner of the nightstand rather than dead center. That leaves the front edge free for a phone, glasses, and a book, and it pushes the shade slightly behind your shoulder line when you sit up to read — the difference between comfortable light and glare.

2. The desk or study corner

Placed on the opposite side of your writing hand, the lamp lights the page without throwing a shadow onto it. The inline switch is the practical detail here: it sits on the cord, so you can route the cord along the back of the desk and switch the lamp without reaching under the shade.

3. Side table or living room accent

The retro silhouette holds up as a decorative piece even when the lamp is off — the wood grain and leather trim do the work. This is the placement where the gold and violet options make the most sense.

On cord routing: the 59-inch cord gives you real flexibility, but plan the run before you commit to a spot. Route it behind the nightstand or along a baseboard rather than across a walkway.

Close view of the leather detailing on the wood and iron table lamp

The Halogen Question: Light Quality and the Wax-Melting Function

This is the single most important thing to understand before buying: the lamp uses a halogen bulb with an E26 or E27 base, and the bulb is not included.

The halogen requirement is not arbitrary. This lamp also supports a wax-melting function, and that function depends on the heat a halogen source produces. Conventional LED bulbs do not generate enough heat for it. So if the wax-melting feature is why you are buying the lamp, plan on halogen and nothing else.

If you only want reading light, the practical note is this: halogen runs hotter than LED, so leave clearance above the shade and keep the lamp away from curtains, dried arrangements, and anything that could rest against the shade. Aromatherapy wax is not included with the lamp and must be purchased separately.

Voltage is rated AC 110-240V, which covers both North American and European outlets.

The wood and iron table lamp lit at dusk beside a reading chair

Specifications

  • Product type: Table lamp
  • Materials: Wood, iron, leather
  • Body finishes: Gold, brown, walnut
  • Shade finishes: Dark green, violet, black, beige, brown
  • Dimensions: L 25cm x W 18cm x H 32cm (L 9.8" x W 7.1" x H 12.6")
  • Light source: Halogen bulb, E26 / E27 base (bulb not included; halogen required for wax melting)
  • Voltage: AC 110-240V
  • Control: Inline on/off switch
  • Cord: 59-inch power cord with plug
  • Moisture resistance: IP20 — indoor use, not waterproof
  • Installation: Indoor, plug-in
  • Certifications: UL, ETL, CE, SAA listed

Dimensions are subject to minor manual measurement tolerance, and colors may vary slightly with lighting and monitor settings.

Size and scale view of the retro table lamp on a bedside nightstand

Quick Comparison: Is This the Right Lamp for Your Room?

Use this checklist to decide quickly.

  • Choose this lamp if you want a warm, focused reading light; you like visible wood grain and leather detailing; your surface is about 10 inches deep; you want a plug-in fixture with no wiring; or you specifically want a wax-melting lamp.
  • Look elsewhere if you need a bathroom or outdoor fixture (IP20 rules it out); you want a large statement lamp for a big console; you want a dimmable LED-only setup; or you need a lamp that fills a room rather than lighting a reading zone.
  • Halogen vs. LED: if you want the wax-melting function, halogen is mandatory. If you only want task light and prefer cooler running bulbs, this lamp's feature set is more than you need.
  • Finish strategy: pick the shade first — it dominates the visual weight. Then choose a body finish that either contrasts (gold against beige) or blends (walnut against brown).

Current pricing and available finish combinations are listed on the COZYEAZY product page.

Frequently Asked Questions

What is the lamp made of?

Wood, iron, and leather. The wood body provides the natural grain and warm tone, the iron frame adds stability and a subtle metallic contrast, and the leather detailing brings a soft, tailored finish.

What bulb does it take, and is it included?

It takes a halogen bulb with an E26 or E27 base. The bulb is not included. Halogen is required if you want to use the wax-melting function, because conventional LED bulbs do not produce enough heat.

Can I use it in a bathroom or outdoors?

No. The lamp has an IP20 rating and is intended for indoor, dry locations only. It is not waterproof and should not be placed in bathrooms, outdoors, or other damp areas.

Is aromatherapy wax included?

No. The lamp supports a wax-melting function when used with a halogen bulb, but the wax itself must be purchased separately.

How big is it, exactly?

L 25cm x W 18cm x H 32cm, or L 9.8" x W 7.1" x H 12.6". The compact footprint suits nightstands, desks, and side tables. Allow for minor manual measurement tolerance.

How do I turn it on?

There is an inline on/off switch on the 59-inch power cord. Plug it into a standard outlet and use the switch.

Questions about finish pairings, sizing, or trade and volume pricing? The COZYEAZY team handles those directly — start from the product page and use the contact link there.


Add Special instructions for your order
Coupon Code
-10%
10% OFF UNLOCK CODE